Powder Recycler

Standard filter type powder recycler:Recycle device is consist of upper box and lower box.Compressed air will seal thejoint between upper box and lower box.The lower box is easy to move and replace when there is no compressed air.Recycle fan locatesin the upper box. Equipment noise is lower than 85dB wich is Chinese Standard.Recycle system use two sets of filter devices (filter elements and final filter). Exhausting airis less than 10mg/m³ (standard of China).Filter element is made of antistatic polyester waterproof material, and installedin the lower box. Filter element will be cleaned by reverse blowself-cleaning device in the recycle system efficiently.Reverse blowdevices blow one after another automaticallywiththe pulse membrane valve. powder blow out of the filter elements will be collected and pump into a powder screen, after screening, powder will return back to powder supply bucket and mix with new powderfor reusing. the whole recycle system is a close circuit. After each shift, switch off recycle fan, blow each filter several times to make sure powder onelementscleaned. Parameters table of powder recycler: No.ItemParameter and description1ModelCHG-HS-70002Number of filter element5 pieces3Specification of filter element325×660mm4Material of filter elementwaterproof polyester 5Precision of filter element5μm6Model of fan4-72-4.0A7Model of motorY132S1-2-5.5kW 3 380V 50Hz8Recycling air6500m3/h9Cleaning form of filter elementPulse automatic blowback10Voltage of Reverse blow valveDC24V 11Reverse blow pressure0.4 0.5MPa12Sealing way between upper and lower boxAir sealing13Moving way of lower boxManual movement